|Product Name||Whatsminer M30S+|
|Normal Hashrate||100Th/s±5% @25℃|
|Power ratio||0.034J/Gh±5% @25℃|
|Power Consumption||3400W±10% @25℃|
|Easy to dissipate|
Whatsminer M30S+ is based on the SHA-256 algorithm, with a maximum hashrate of 100Th/s for a power consumption of 3400W.
Whatsminer M30S+ 100T adopts Whatsminer’s classic single-tube dual-fan cooling design. It has 3 built-in hashrate boards, each of which has 235 Samsung 8nm ASIC chips, a total of 705 chips constituting a computing power of 100TH/s .The sloped streamline design of the heat sink on the backplane makes the air flow more smoothly, which is beneficial to reduce the dust accumulation of the hash board and keep the hash board clean.
The power supply is recommended to be 20% or more higher than the power consumption of the miner. The power supply of the miner must be plugged in to each port. When inserting the power cables of the computing board and the control board, pay attention to the direction of the buckle. Do not connect them in reverse, as the reverse connection will burn the computing board or the control board. When the power supply is connected to the miner, there is no difference in the line sequence, as long as it is connected well, there is no problem.